The ADT7420UCPZ-RL7 is a High Accuracy Digital I2C Temperature Sensor offering breakthrough performance over a wide industrial range. It contains a band gap temperature reference, a temperature sensor and a 16-bit ADC to monitor and digitize the temperature to a 0.0078°C resolution. The ADC resolution by default is set to 13-bit (0.0625°C) and is an user programmable mode that can be changed through the serial interface. The ADT7420 has a shutdown mode that powers down the device and offers a shutdown current of typically 2μA at 3.3V. Pin A0 and Pin A1 are available for address selection, giving the ADT7420 four possible I2C addresses. The CT pin is an open-drain output that becomes active when the temperature exceeds a programmable critical temperature limit. The INT pin is also an open-drain output that becomes active when the temperature exceeds a programmable limit. The INT and CT pins can operate in either comparator or interrupt mode.
- High performance
- 16-bit Temperature resolution (0.0078°C)
- Ultralow temperature drift (0.0073°C)
- NIST traceable or equivalent
- Easy implementation
- Low power
- 700μW Typical power (at 3.3V in normal mode)
- 7μW Typical power (at 3.3V in shutdown mode)
- Critical over-temperature interrupt
- Over-temperature/under-temperature interrupt
传感与仪器, 医用, 工业, 自动化与过程控制, HVAC
(EN)
