The ADM6713 series reset Generator Circuit suitable for use in microprocessor-based systems. It provides a reset signal on power-up, power-down and whenever the supply voltage falls below a preset threshold. In addition, part has a debounced manual reset input so that a reset signal can also be initiated with an external switch or logic signal. A reset timeout of at least 140ms occurs when VCC rises above the threshold. This gives the supply voltage time to stabilize before the microprocessor starts up. The ADM6711 has a push-pull output, so no additional external components are needed. The ADM6713 open-drain output requires an external pull-up resistor that can be connected to a voltage higher than VCC, if desired.
- Specified over-temperature
- Manual reset input
- Power supply glitch immunity
- Reset assertion down to 1V VCC
- Low power consumption (12μA)
计算机和计算机周边, 车用, 电源管理, 自动化与过程控制, 传感与仪器
(EN)
