The ADL5610-EVALZ is an evaluation board for ADL5610 device. The ADL5610 is a single ended RF/IF gain block amplifier that provides broadband operation from 30MHz to 6GHz. It provides a low noise figure of 2.2dB with a very high OIP3 of more than 38dBm simultaneously, which delivers a high dynamic range. This RF/IF gain block amplifier provides a gain of 18dB, which is stable over frequency, temperature and power supply and from device to device. For normal operation ADL5610-EVALZ evaluation board requires a single 5V/200mA power supply. The 5V power supply should be connected to the test loops labelled VCC and GND. The RF input is applied to the SMA connector labelled RFIN. The RF output is available at the SMA connector labelled RFOUT.
- High dynamic range gain block
- Input and output internally matched to 50ohm
- Integrated bias circuit
- P1dB of 20.4dBm at 900MHz
- Single 5V power supply
- Low quiescent current of 92mA
射频通信
