The AD8609ARZ-REEL7 from Analog Devices is a precision micropower, low noise CMOS, rail to rail input/output quad operational amplifier in 14 lead NSOIC package. This amplifier uses a patented trimming technique that achieves superior precision without laser trimming. The device is fully specified to operate from 1.8V to 5V single supply or from ±0.9V to ±2.5V dual supply. The combination of low offsets, low noise, very low input bias currents, low power consumption, low input voltage and current noise makes the AD8609 especially useful in portable and loop powered instrumentation. The ability to swing rail to rail at both the input and output enables designers to buffer CMOS ADC, DAC, ASIC and other wide output swing devices in low power, single supply systems. The AD8609 has current noise density of 0.05pA/√Hz at f = 1KHz, VS = 5V. Typically applications include battery powered instrumentation, multipole filters, sensors, low power and ASIC input or output amplifiers.
- Maximum micropower of 50μA and slew rate of 0.1V/μs at RL = 10Kohm, VS = 5V
- Low distortion, no phase reversal, unity gain stable
- Input offset voltage of 12μV at VS = 3.3V, VCM = 0.5V and 2.8V
- input bias current of 50pA and input offset current of 250pA at VS = 5V, -40°C < TA < +125°C
- CMRR of 100dB (0V < VCM < 5V, VS = 5V, 40°C < TA < +125°C), PSRR of 100dB (1.8V < VS < 5V)
- Large signal voltage gain of 450V/mV at RL = 10Kohm, 0.5V < VO < 4.5V, VS = 5V
- 40μA supply current per amplifier at VO = 0V, VS = 5V, -40°C <TA < +125°C
- 23μs settling time (0.1%) at G = ±1, 2V step, VS = 5V, 400KHz GBW at RL = 100Kohm, VS = 5V
- Voltage noise density of 25nV/√Hz (f = 1KHz), 22nV/√Hz (f = 10KHz) at VS = 5V
- Operating temperature range from -40°C to +125°C
信号处理
(EN)
