The AD8362-EVALZ is an evaluation board to evaluate the performance of AD8332 device. The AD8362 is a true RMS responding power detector that has a 65dB measurement range. It is intended for use in a variety of high frequency communication systems and in instrumentation requiring an accurate response to signal power. The AD8362-EVALZ is a fully populated, 4 layer, FR4 based evaluation board. For normal operation, it requires a 5V/50mA power supply. The 5V power supply should be connected to the pins labelled VPOS and AGND. The RF input signal is applied to the SMA connector labelled RFIN and the output voltage is available on the SMA connector labelled VOUT.
- Complete fully calibrated measurement/control system
- Accurate RMS to DC conversion from 50Hz to 3.8GHz
- Input dynamic range is greater than 65dB, -52dBm to +8dBm in 50ohm
- Waveform and modulation independent such as GSM/CDMA/TDMA
- Linear in decibels output, scaled 50mV/dB
- Law conformance error of 0.5dB
- All functions temperature and supply stable
- Operates from 4.5V to 5.5V at 24mA
- Power down capability to 1.3mW
射频通信, 传感与仪器, 通信与网络, 电源管理
(EN)
