The AD592 series 2-terminal monolithic Temperature Transducer provides an output current proportional to absolute temperature. For a wide range of supply voltages the transducer acts as a high impedance temperature dependent current source of 1μA/K. Improved design and laser wafer trimming of the IC's thin film resistors allows the AD592 to achieve absolute accuracy levels and nonlinearity errors. With a single supply (4 to 30V) the AD592 is 0.5°C temperature measurement accuracy. A wide operating temperature range (-25 to +105°C) and highly linear output make the AD592 an ideal substitute for older, more limited sensor technologies (i.e., thermistors, RTDs, diodes, thermocouples). As the AD592 is a temperature dependent current source, it is immune to voltage noise pickup and IR drops in the signal leads when used remotely. The high output impedance of the AD592 provides greater than 0.5°C/V rejection of supply voltage drift and ripple.
- 2-terminal Monolithic IC - temperature in/current out
- Laser wafer trimming and temperature testing insures that AD592 units are easily interchangeable
- Electrically rugged
- Supply irregularities and variations or reverse voltages up to 20V will not damage the device
- Excellent linearity - 0.15°C maximum (0 to +70°C)
- 1μA/K High level output
- Minimal self-heating errors
传感与仪器, HVAC, 系统监控, 自动化与过程控制, 测试与测量, 车用
