The AD5627RBRMZ-1 is a low power dual 12-bit buffered voltage-out Digital-to-analog Converter (DAC) operates from a single 2.7 to 5.5V supply and have an I2C-compatible serial interface. It has a 1.25V, 5ppm/°C reference, giving a full-scale output range of 2.5V, the AD5627RBRMZ has a 2.5V, 5ppm/°C reference, giving a full-scale output range of 5V. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5627 requires an external reference voltage to set the output range of the DAC. It incorporates a power-on reset circuit that ensures the DAC output powers up to 0V and remains there until a valid write takes place. The device contains a per-channel power-down feature that reduces the current consumption of the device to 480nA at 5V and provides software-selectable output loads while in power-down mode.
- Guaranteed monotonic by design
- On-chip reference
- External reference only
- Power-on reset to zero scale
- Per channel power-down
- Hardware LDAC and CLR functions
自动化与过程控制, 便携式器材