The AD5611AKSZ-500RL7 is a single 10-bit buffered voltage output Digital-to-analog Converter (DAC) operates from a single 2.7 to 5.5V supply, consuming typically 75μA at 5V. Their on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5611 utilizes a versatile 3-wire serial interface that operates at clock rates up to 30MHz and is compatible with SPI, QSPI?, MICROWIRE? and DSP interface standards. The reference for the AD5611 is derived from the power supply inputs and therefore, gives the widest dynamic output range. The part incorporates a power-on reset circuit, which ensures that the DAC output powers up to 0V and remains there until a valid write to the device takes place. It contains a power-down feature that reduces current consumption to typically 0.2μA at 3V. It also provides software-selectable output loads while in power-down mode. The part is put into power-down mode over the serial interface.
Guaranteed monotonic by design
Power-on reset to 0V with brownout detection
3 Power-down functions
Low power serial interface with Schmitt-triggered inputs
(EN)
